Latest Products
-
ESP32 Basic Core loT Development Kit V2.7
65.33€ -
Power Adapter DC 9V 1A for Arduino
5.36€ -
Charger for rechargeable batteries: AA & AAA
31.89€ -
AAA (box of 4) - Rechargeable batteries with charger ( Copy )
47.60€ -
AA (box of 4) - Rechargeable batteries with charger
29.75€ -
6LR61 9V battery
3.81€ -
AA alkaline batteries box of 4 ( Copy )
2.98€ -
AAA alkaline batteries box of 4
4.40€ -
Metal Film Polypropylene DC Capacitor Kit of 150
29.99€ -
mica capacitors kit of 300
27.85€ -
Ceramic Capacitor Kit of 600
23.80€ -
Micro Corrosion Protection Peristaltic Pump with Large Flow
83.30€ -
Transistors Assortment Kit of 300
32.73€ -
transistor arrays chip integrated circuit set of 10
11.90€ -
LED'S kit of 500
11.90€ -
Solid Side Emitting Fiber Optics 20meters, <5mm diameter
14.28€ -
Soldering Paste with lead
17.85€ -
SMD transistors assortment kit
29.75€ -
SMD solder paste with lead
14.28€ -
SMD resistors assortment kit of 1800
17.85€ -
SMD capacitors assortment kit of 660
23.80€ -
Shift Register IC
14.28€ -
plain bore gears (a variety of different sizes)
11.90€ -
Resistors Set (400-600pcs)
23.80€ -
Operational tiny Audio Amplifier Breakout
5.00€ -
74HC4051 8 Channel Mux Analog Multiplexer Module
4.17€ -
Heatshrink Set 580pcs - Coloured
4.17€ -
12V 37 DC Geared Motor
10.12€ -
Electrical Wire for prototyping
5.00€ -
IC Chip Assortment Kit of 150
64.74€ -
35ml Glass Test Tubes 20 x 150mm
29.35€ -
12075 DC5V Active Buzzer
1.43€ -
830 Point MB-102 Breadboard
7.62€ -
set of 10 Alligator to Alligator Cable
5.00€ -
KY-008 Laser Transmitter Durable
4.76€ -
:MOVE mat line following and activity maps - A1 s
8.93€
Specifications:
Dimension: 12 x 12mm
Working Voltage: DC 2-5V
Timing can be set to a minimum to a maximum of 2 seconds 1,000 hours
Function and Design
1. The circuit according to claim connected and set a good time resistance and supply voltage;
2. Before the power not trigger output is high;
3. Trigger terminal "falling" trigger effective immediately
after the trigger output terminal goes low at the same time start the timer circuit;
4. Set the timer time to recover after the output terminal is high, wait for the next "falling" trigger;
5. The chip is not repeated triggered, meaning that
continue to trigger in the period after the trigger chip output low if the trigger is invalid;
6. The trigger end of "falling" Trigger refers to the instantaneous change from high level to a low level;
7. General refers to VCC high voltage, low means 0-0.3v or GND,
provided that they meet the level requirements can be;
8. trigger terminal can be connected to touch switch or microcontroller IO port or
other digital circuits have a "falling" can effectively trigger;
9. The trigger can be designed to power, only to trigger a short circuit to ground, power is triggered,
the time to recover after the output to a high level, waiting for the next
Falling edge trigger again.
Chip Features:
1. The use of low-power CMOS technology, lead-free and environmentally friendly.
2. Direct Push can output low LED
(please add current limiting resistor), the output high may push transistor (please add current limiting resistor).
3. Available resistance adjusting timing, there are 8 * N (N = 0.1.2.3) times the timing selection,time can be adjusted from 2s-1000h.
4. Optional trigger timing and triggering termination ground electric timer.
5. standby output high, falling edge trigger, post-trigger output low, after the delay recovery high.
Dimension: 12 x 12mm
Working Voltage: DC 2-5V
Timing can be set to a minimum to a maximum of 2 seconds 1,000 hours
Function and Design
1. The circuit according to claim connected and set a good time resistance and supply voltage;
2. Before the power not trigger output is high;
3. Trigger terminal "falling" trigger effective immediately
after the trigger output terminal goes low at the same time start the timer circuit;
4. Set the timer time to recover after the output terminal is high, wait for the next "falling" trigger;
5. The chip is not repeated triggered, meaning that
continue to trigger in the period after the trigger chip output low if the trigger is invalid;
6. The trigger end of "falling" Trigger refers to the instantaneous change from high level to a low level;
7. General refers to VCC high voltage, low means 0-0.3v or GND,
provided that they meet the level requirements can be;
8. trigger terminal can be connected to touch switch or microcontroller IO port or
other digital circuits have a "falling" can effectively trigger;
9. The trigger can be designed to power, only to trigger a short circuit to ground, power is triggered,
the time to recover after the output to a high level, waiting for the next
Falling edge trigger again.
Chip Features:
1. The use of low-power CMOS technology, lead-free and environmentally friendly.
2. Direct Push can output low LED
(please add current limiting resistor), the output high may push transistor (please add current limiting resistor).
3. Available resistance adjusting timing, there are 8 * N (N = 0.1.2.3) times the timing selection,time can be adjusted from 2s-1000h.
4. Optional trigger timing and triggering termination ground electric timer.
5. standby output high, falling edge trigger, post-trigger output low, after the delay recovery high.
- Availability: 10