Power - DC-DC etc regulators

Sort By:  
  • 5V Power Bank circuit board ()
    Product Features:
    1.4-level LED lamp display power, not working state intelligent automatic shutdown;
    2. Built-in lithium battery protection IC, over-current, overpressure, undervoltage protection;
    3. Dual USB output;
    4, motherboard size: Thick 8mm* width 32mm* long 69mm.
    Product Basic Parameters:
    Input port: MicroUSB (Andro)
    Input requirements: 5V constant voltage power supply can do charge input power, the most matching charger for 5v1a above
    Output port: USB
    Output parameters: 5V1A/5V2A
    Requirements for rechargeable batteries:
    Available Batteries: 18650 batteries, cell phone batteries, flat-panel batteries, MP3 batteries, etc. 3.7v-4.2V polymer Lithium battery, can be a single section (piece) power supply, can also be multiple sections (tablets) parallel power supply (not supported in series, not in series). (Note: Parallel increase in capacity, series is to increase the voltage, only in parallel!) )
    Can parallel 2-6 knots 18650 batteries!!!
    Non-battery: dry battery, battery, 1.2V rechargeable battery, NiMH battery, 3.2V Lithium Lithium Polymer battery.
    Add to Cart
    4.17€
  • 1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V DC-DC Step Up Module 3.3V ()
    3.3V output version:
    The input voltage is 0.8-3.3v; Output voltage 3.3V
    Output current: 500 mA
    The starting voltage is 0.8V and the output current is 10mA
    Input 1-1.5v, output 3.3V, 50-110ma;
    Input 1.5-2v, output 3.3V, 110-160ma;
    Input 2-3v, output 3.3V, 160-400ma;
    Add to Cart
    2.62€
  • Voltage regulator 3.3V LDO MCP1700-3302E ()
    V REG, LDO + 3.3 V 250mA
     
    The MCP1700-3302E/TO is a CMOS low dropout positive voltage regulator which can source up to 250mA of current with an extremely low input-output voltage differential of 178mV at 250mA. The low dropout voltage combined with the low current consumption makes this part ideal for battery operation.
    • Extremely low operating current for longer battery life
    • Very low dropout voltage
    • High output voltage accuracy
    • Over-current and over-temperature protection
    • Pin compatible upgrade for bipolar regulators

    Applications

    Power Management, Portable Devices, Automotive




    Output Type:
     
    Input Voltage Min:2.3V
    Input Voltage Max: 6V
    Fixed Output Voltage Nom.:3.3V

    Output Current:250mA
    Dropout Voltage Vdo:178mV

    Operating Temperature Min:-40°C
    Operating Temperature Max:125°C
    Add to Cart
    0.83€
  • 3.7V to 5V 2A 18650 Step-up Battery Module ()
    • 1.4 level LED lights display power, intelligent automatic shutdown in non-working state;
      2. Built-in lithium battery protection IC with overcurrent, overvoltage and undervoltage protection;
      3. Dual USB output;
      4, motherboard size: thickness 8mm * width 32mm * length 69mm.
      Basic product parameters:
      Input port: MicroUSB (Android port)
      Input requirements: 5V constant voltage power supply can be used as charging input power, the most suitable charger is 5V1A or above
      Output port: USB
      Output parameter: 5V1A/5V2A
    •  
    Add to Cart
    5.36€
  • DC-DC Automatic Buck Boost Power Module Step Up and Down Board Input 3-15V Output 5V ()
    • Type:Voltage Regulator
    • Condition:New
    • Application:Computer
    • Supply Voltage:Input 3-15V Output 5V
    • Dissipation Power:Step Up and Down Board
    • Model Number:Buck Boost Power Module
    Feature:
     
    The DC-DC power module is automatically buck-boost to support the shutdown function.
    The maximum input voltage is 15VDC, the quiescent current is less than 200uA, the fixed output is 3.3V and the maximum output current is 600mA.
    Design work frequency of up to 1.2MHz, high stability, cost-effective, all industrial-grade components, long working voltage drift-free, suitable for demanding applications.
     
    Application:
     
    Widely used in communications equipment, digital radio, industrial motherboards, toys, model aircraft, microcontroller motherboards, household electrical appliances, automotive power supply, security monitoring, field collection, street lamps.
     
    Parameters:
     
    Input voltage: 2.5V-15V
    Maximum current: 600mA
    Output voltage: 3.3V
    Maximum efficiency: 75%
     
    Package Included:

    1 x DC-DC Automatic Buck Boost Power Module
     

    •  
    Add to Cart
    5.36€
  • 3.3V 5V 12V Multi Output Voltage Conversion DC-DC 12V to 3.3V 5V 12V Power Module I83 ()
    1 .Input: DC 6V - 12V (input voltage must be higher than the output voltage to 1V or more.)
    2. Output: 3.3V (+ - 0.05v error), 5.0V (+ - 0.05v error), 800mA (load current can not exceed 800ma), 12V (12V input directly to output)
    3. Pairs of panel design, layout, nice;
    4.Specially designed two pin mounting holes, can be directly fixed to the tunnel plate to extend the experiment;
    5 Using a plurality of input and output pin, easy to use and connect;
    6 PCB board size: 4.5cm * 4.5cm
    7 With power indicator light (red)
    Add to Cart
    4.17€
  • MCU-2307 MP2307 3A/23V 340KHz synchronous rectification step-down converter 3.3V adjustable ()
    • Description

      3A Continuous Output Current,
      4A Peak Output Current
      Wide 4.75V to 23V Operating Input Range
      Integrated 100m? Power MOSFET Switches
      Output Adjustable from 0.925V to 20V
      Up to 95% Efficiency ? Programmable Soft-Start
      Stable with Low ESR Ceramic Output Capacitors
      Fixed 340KHz Frequency
      Cycle-by-Cycle Over Current Protection
      Input Under Voltage Lockout
      Thermally Enhanced 8-Pin SOIC Package APPLICATIONS
      Distributed Power Systems
      Networking Systems
      FPGA, DSP, ASIC Power Supplies
      Green Electronics/Appliances
      Notebook Computers

      Package Type:
      All goods will pack into cartons and wrapped full of waterproof tape before shipment .
       

      MP2307 3A / 23V 340KHz Synchronous Rectifier Buck Converter 3.3V Adjustable Winder

       

      The MP2307 is a monolithic synchronous buck regulator. The device integrates 100mΩ MOSFETS that provide 3A of continuous load current over a wide operating input voltage of 4.75V to 23V. Current mode control provides fast transient response and cycle-by-cycle current limit. An adjustable soft-start prevents inrush current at turn-on and in shutdown mode, the supply current drops below 1µA. This device, available in an 8-pin SOIC package, provides a very compact system solution with minimal reliance on external components.

     

    •  
    Add to Cart
    5.36€
  • 1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V DC-DC Step Up Module 5V ()
    5V output version:
    The input voltage is 0.9-5v; Output Voltage 5V
    Output current: 480ma
    Starting voltage 0.8V, output current 7ma
    Input 1-1.5v, output 5V, 40-100ma;
    Input 1.5-2v, output 5V, 100-150mA;
    Input 2-3v, output 5V, 150-380ma;
    Input over 3V, output 5V 380-480ma;
    Add to Cart
    2.62€
  • DC-DC Step Up Circuit Module 3V to 5V 1A ()
    1. Module Properties: non-isolated step-up module (BOOST)
    2. Input voltage: 1-5V
    3. Output voltage: 5.1~5.2V
    4. Output Current: Rated 1A~1.5A (Single lithium battery input)
    5. Conversion efficiency: up to 96% ( input voltage, the higher the efficiency )
    6. Switching Frequency: 500KHz
    7. Output ripple: 30mV (Max) 20M Bandwidth ( Input 4V, Output 5.1V 1A)
    8. Voltage indication: LED lights with a load (input voltage is lower than 2.7V LED indicator off )
    9. Operating temperature: Industrial grade (-40 Celsius to +85 Celsius )
    10. Full load temperature rise: 30 Celsius
    11. Quiescent Current: 130uA
    12. Load regulation: ± 1%
    13. Voltage regulation: ± 0.5%

    14. Dynamic response speed: 5% 200uS

    Add to Cart
    2.62€
  • Voltage regulator 3.3V HT7333-A 7333-A HT7333 HT7333A-1 TO92 Low Consumption LDO New Original ()
    The HT73xx-7 is a low power high voltage series of regulators implemented in CMOS technology which has the advantages of low voltage drop and low quiescent current. They allow input voltages as high as 30V and are available with several fixed output voltages ranging from 2.1V to 5.0V. When the CE input is low, a fast discharge path pulls the output voltage low via an internal pull-down resistor. An internal over-current protection circuit prevents the device from damage even if the output is shorted to ground. An over-temperature protection circuit ensures the device junction temperature will not exceed a temperature of 150°C.
     
       
    Output Type Fixed
    Voltage - Output (Min/Fixed) 3.3V
    Output Configuration Positive
    Voltage - Input (Max) 12V
    Operating Temperature -40℃~+85℃ (TA)
    Current - Output 250mA
    Voltage Dropout (Max) 90mV @ 40mA (typ)
    Add to Cart
    0.83€
  • High quality LM1117 AMS1117 4.5-7V turn 3.3V DC-DC Step down Power Supply Module For Arduino bluetooth Raspberry pi ()

    AMS1117 5.5V turn 3.3V DC-DC Step down Power Supply Module

    Feature:

    1.input: DC 4.5 V - 7 V (input voltage must high than output voltage 1 V above).

    2. output: 3.3 V, 800 Ma (load current should not exceed 800 ma)

    3. double panel design, layout beautiful and easy,

    4. special design two row needles fixed hole, can be directly fixed on the hole plate for extended experiment;

    5. input/output use 2 p single row needle , convenient connection;

    6. PCB panel size: approx.2.5 cm * 1.1 cm

    7. with indicator light (red)

    8. weight is about: 1.6 g

     

    package include:

    1 x AMS1117 5.5V turn 3.3V DC-DC Step down Power Supply Module

    Packed Safely in Bubble Bag.

    Add to Cart
    2.98€
  • Mini 360 DC to DC
    MINI360 3A MINI DC-DC STEP DOWN CONVERTER VOLT REGULATOR 5V-23V TO 3. 6V 9V 12V ()

    Size: 17*11*3.8mm
    Color: multicolor
    Material: electronic components
    Input voltage: 4.75V-23V
    Output voltage: 1V-17V
    Output current: 3A peak,  1.8A for long time
    Transfer efficiency: 96% (MAX.)
    Switching freqnency: 340KHz
    Output ripple: 30mV (no-load)
    Load regulation: ±0.5%
    Voltage  regulation: ±2.5%
    Working temperature: -40~85℃

    Package list:
    1/5/10 x DC -DC power supply module

    Features:
    < Efficiency: Up to 96% (depends on the difference between input and output voltage) This module uses synchronous rectification, efficient power conversion available.
    < Good performance: Use integrally molded power inductor and synchronous rectifier control chip, small and efficient
    < Wide application: Great for LED lights, micro-controllers, battery chargers, and most other low power devices.
    < Compact and lightweight: It is compact and portable, high efficiency.

    Notes:
    1. Please allowed 1-3mm differences due to manual measurement, thank you for your understanding!
    2. Due to the difference between different monitors, please understand that the picture may not reflect the actual color of the item.

    Add to Cart
    3.81€
  • LM1117T-3.3 LM1117T LM1117 Low Dropout Voltage Regulator 3.3V ()
    This is the basic LD1117V33 voltage regulator, a low drop positive regulator with a 3.3V fixed output voltage.

    This fixed regulator provides a great amount of stability and protection for your project and with its on ship trimming this regulator is able to reach an output voltage tolerance within ±1%.

    Each one of these voltage regulators can output a max current of 800mA.

     
    • Output Voltage: 3.3V
    • Output Current: 800mA
    • Dropout Voltage: 1V
    • Internal Current and Thermal Limit
    Add to Cart
    1.79€
  • HT7333-A 7333-A HT7333 HT7333A-1 TO92 Low Power Consumption LDO ()
    Features Ultra low quiescent current: 4A (typ.)
    High input voltage (up to 12V)
    Output voltage:  3.3V
    Output voltage accuracy: tolerance 3%
    Maximum output current: 250mA
    Low dropout voltage Low temperature coefficient 


    Features

    Ultra low quiescent current: 4mA (typ.) High input voltage (up to 12V) Output voltage: Maximum output current: 250mA Low dropout voltage Low temperature coefficient TO-92, SOT-89 package

    Applications

    Battery-powered equipment Voltage regulator for microprocessor Voltage regulator for LAN cards Wireless Communication equipment Audio/Video equipment

    The HT73XX series is a set of three-terminal, low power, high voltage regulators implemented in CMOS technology. The series features extremely low quiescent current which is typically 4mA. They allow input voltages as high as 12V. The device provides large current with a significantly small dropout voltage. The HT73XX consists of a high-precision voltage reference, an error correction circuit, and a current limited output driver. They are available with several fixed output voltages ranging from to 5.0V. CMOS technology ensures low dropout voltage and low current consumption. Although designed primarily as fixed voltage regulators, these devices can be used with external components to generate variable voltages and currents.

    Add to Cart
    0.83€
  • MP1584EN Ultra-small size DC-DC step-down power supply module 3A adjustable step-down module super LM2596 ()

    Features:

    • Input Voltage : 4.5~28V
    • Output voltage : 0.8V~20V
    • Output Current : 3A(Max)
    • Efficiency : 92%(Max)
    • Switch Frequency : 1.5MHz(Max),1MHz(Typ)
    • Operating Temperature : -20 to +85
    • Size : 22mm * 17mm * 4mm
    Add to Cart
    2.62€
  • mini 1.8V 3V 3.7V 5V to 3.3V Boost & Buck Low Noise Regulated Charge Pump DC/DC Converter ()
    Supply Voltage:

    Low Noise, Regulated Charge Pump DC/DC Converter

    2 in 1 DC-DC Step-Down & Step-Up Converter module

    Fixed 3.3V+-4% Output

    Voltage Input Range: 1.8~5V

    Long time maximum output current 100mA

    Short time maximum output current 150mA

    working frequency 1.2MHz.

    Short-Circuit Protection

    No load input current : 0.65mA

    2.54mm pin pitch, Arduiuo Breadboard MCU Development Board friendly

    Excluding Pin Size 11mm x 7.62mm x 4.5mm(small)

    Weight : about 0.5g(Very very light)

     

    Applications:
     
    Low Power Wifi Module:ESP8266
    Low-power Bluetooth module : HC-05 HC-06
    Low-power Wireless UART module : HC-11 HC-12
    Low-power wireless module : CC1101 CC2500 Nrf24l01+
    Low-power LED Driver
    2 AA Cell to 3.3V
    USB On-The-Go Devices
    Handheld Devices

     
    Add to Cart
    1.79€
Per Page      1 - 16 of 16

Powered by Abantecart eCommerce Solution