Cables

Sort By:  
  • Power Adapter DC 9V 1A for Arduino ()

    Description
    Input : 100V-240V 50/60Hz
    Output : DC 9V 1A /1000mA
    Length of the cable: 100CM
    Out put adaptor : 5.5mm x 2.1mm
    Dimension: 7.6 x 7.5 x 2.6 cm
    the adapters Connector: inside positive (+) outside negative (-)
    Power Supply with LED indicator
    Product Features:
    (1) completely solve the problem of insufficient power supply.
    (2) to better protect the circuit, long life, and make faster transmission.

    Add to Cart
    5.36€
  • set of 10 Alligator to Alligator Cable ()

    Description: Cable length: 46cm
    Material : Metal, Soft Plastic
    2pcs for one color, total 10pcs for the whole set

    Add to Cart
    5.00€
  • 20cm Female to Female Jumper Wires (pack of 5) ()

    Generic Arduino 20cm FEMALE TO FEMALE Solderless Jumper Breadboard Wires (Pack of 5 wires)

    Please note that photo contains pack of 40
    Add to Cart
    1.19€
  • 9V Battery Clip with 5.5mm/2.1mm Plug ()
    This is a high quality 9V battery clip with 5.5mm/2.1mm barrel connector. This is prefect for Arduino Uno, Arduino Due, Arduino Mega 2560 and Arduino Ethernet Shield.
    Add to Cart
    1.79€
  • Electrical Wire for prototyping ()

    Details:

    Core diameter:0.2mm²
    Wire No.:30awg
    Outer diameter:0.55-0.58mm
    Line length:250m
    Temperature resistance:105 °
    Inner side of copper wire:About 0.25mm
    Outer cover:PVC material
    Single strand copper core crossing tin,with anti-oxidation effect.​
    Add to Cart
    5.00€
  • Flashing Cable of CH340G USB to TTL Module ()
    USB To TTL Serial Adapter Module Upgraded Download Cable CH340 Chipset for WinXP
    Features: 100% brand new and high quality
    This is a newly designed product that uses the CH340 chip.
    The CH340 provides a convenient solution for connecting a RS232-like full-duplex asynchronous serial device to any universal serial bus (USB) host.
    The CH340G is perfectly compatible with WinXP/98/VISTA/7/8/systems and can emulate on most operating systems, allowing existing applications based on COM ports to be easily ported and USB connected without having to rewrited COM The port software applies a traditional COM port.
    The cable mainly used in MCU serial communication, can be used in 51SCM, ARM and other application scenarios.
    Ideal USB debugs cord for Vendor ID re-write, router, GPS, set top box, flash firmware on hard drive, etc.

    Specifications: Material:ABS
    Color:Black
    Length:Approx. 100cm/39.37 inches
    Add to Cart
    3.21€
  • FT232RL USB to TTL Serial Adapter Module ()

    FT232RL FTDI USB to TTL serial adapter module for Arduino and other microcontrollers.


    Specifications:

    • Interface: Mini USB
    • Chip: FT232RL
    • Indicator LEDs: RXD / TXD transceiver communication indicators
    • Power: USB power supply, 5V or 3.3V selectable
    • Pins: DTR, RXD, TX, VCC, CTS, GND
    • Pitch: 2.54mm
    • Size: 36 x 18mm (L x W)
    Add to Cart
    4.40€
  • 10cm Male to Male Jumper Wires (pack of 5) ()

    Generic Arduino 10cm FEMALE TO FEMALE Solderless Jumper Breadboard Wires (Pack of 5 wires)

    Please note that photo contains pack of 40
    Add to Cart
    1.19€
  • 20cm Male to Female Jumper Wire (pack of 5) ()
    20cm Male to Female Solderless DuPont Jumper Breadboard Wire (pack of 5)
    (Please note that image containts a pack of 40)
    Add to Cart
    1.19€
  • usb extension cable 3m ()
    This USB 2.0 type A Male to type A Female Extension Cable USB 2.0 certified and is perfect for extending a USB cable. Ideal for use with devices / peripherals such as your mouse, keyboard, card dreader, USB hub, flash drive, memory stick, MP3 player, printer, scanner, modem, digital camera and many other USB devices.
    Add to Cart
    4.90€
  • 9V battery connector ()
    • 9 volt battery connector
    • 6-inch long red and black leads
    • Good for use in science experiments
    Add to Cart
    2.50€
  • 10cm Male to Female Jumper Wire (pack of 5) ()
    10cm Male to Female Solderless DuPont Jumper Breadboard Wire (pack of 5)
    (Please note that image containts a pack of 40)
    Add to Cart
    1.19€
  • SCART to SCART 1.5m ()
    • Male-male SCART to SCART Lead
    • Fully wired - all 21 pins connected
    • Excellent quality
    Add to Cart
    6.00€
  • PL2303HX USB to TTL Download Module ()

    Features:

       1. Using the new control chip PL2303HX, it can brush the machine at high speed and stably
       2. With 500mA self-recovery fuse overcurrent protection
       3. Set two data transmission indicators to monitor the data transmission status in real time
       4. Brush 3.3V and 5V pin interface, convenient for different voltage system machines that need power supply
       5. The interface pin header is parallel to the board, instead of being installed perpendicular to the board, which is convenient for the DuPont line when flashing.
       6. The entire circuit board is covered with transparent heat-shrinkable tubing, so that the PCB circuit board and the entity form an independent state, thereby protecting the board metal from sudden explosion and burning. Due to the use of transparent materials, there is no interface for screen silk screen viewing and indicator monitoring effects
       7. Support WIN7 syste

    Add to Cart
    3.21€
  • 10cm Female to Female Jumper Wires (pack of 5) ()

    Generic Arduino 20cm FEMALE TO FEMALE Solderless Jumper Breadboard Wires (Pack of 5 wires)

    Please note that photo contains pack of 40
    Add to Cart
    1.19€
  • 20cm Male to Male Jumper Wires (pack of 5) ()

    Generic Arduino 20cm FEMALE TO FEMALE Solderless Jumper Breadboard Wires (Pack of 5 wires)

    Please note that photo contains pack of 40
    Add to Cart
    1.19€
  • FT232 USB To TTL Flash Line With CTS RTS ()
    FT232 USB to TTL serial adapter 3.3V (6 pin 0.1” pitch female socket header) connects devices with 3.3 V logic level UART signals interface to a laptop via USB port
    A genuine FT232RL chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates
     
    FTDI USB to TTL serial cable 3V3 (6 way outputs) provides access to Tx, Rx, RTS#, CTS#, VCC (5v) and GND (power line provides 5V and data signal is at 3.3V)
    FTDI chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM
     
    6 pin header TTL to USB converter cord is compatible with Windows 11, 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE, Mac OS, Linux 2.4 and greater; ideal USB 2.0 debug cord for Vendor ID re-write, router, GPS, set top box, transmitter, flash firmware on hard drive, etc.
    Add to Cart
    5.59€
Per Page      1 - 17 of 17

Powered by Abantecart eCommerce Solution