Latest Products
-
ESP32 Basic Core loT Development Kit V2.7
65.33€ -
Power Adapter DC 9V 1A for Arduino
5.36€ -
Charger for rechargeable batteries: AA & AAA
31.89€ -
AAA (box of 4) - Rechargeable batteries with charger ( Copy )
47.60€ -
AA (box of 4) - Rechargeable batteries with charger
29.75€ -
6LR61 9V battery
3.81€ -
AA alkaline batteries box of 4 ( Copy )
2.98€ -
AAA alkaline batteries box of 4
4.40€ -
Metal Film Polypropylene DC Capacitor Kit of 150
29.99€ -
mica capacitors kit of 300
27.85€ -
Ceramic Capacitor Kit of 600
23.80€ -
Micro Corrosion Protection Peristaltic Pump with Large Flow
83.30€ -
Transistors Assortment Kit of 300
32.73€ -
transistor arrays chip integrated circuit set of 10
11.90€ -
LED'S kit of 500
11.90€ -
Solid Side Emitting Fiber Optics 20meters, <5mm diameter
14.28€ -
Soldering Paste with lead
17.85€ -
SMD transistors assortment kit
29.75€ -
SMD solder paste with lead
14.28€ -
SMD resistors assortment kit of 1800
17.85€ -
SMD capacitors assortment kit of 660
23.80€ -
Shift Register IC
14.28€ -
plain bore gears (a variety of different sizes)
11.90€ -
Resistors Set (400-600pcs)
23.80€ -
Operational tiny Audio Amplifier Breakout
5.00€ -
74HC4051 8 Channel Mux Analog Multiplexer Module
4.17€ -
Heatshrink Set 580pcs - Coloured
4.17€ -
12V 37 DC Geared Motor
10.12€ -
Electrical Wire for prototyping
5.00€ -
IC Chip Assortment Kit of 150
64.74€ -
35ml Glass Test Tubes 20 x 150mm
29.35€ -
12075 DC5V Active Buzzer
1.43€ -
830 Point MB-102 Breadboard
7.62€ -
set of 10 Alligator to Alligator Cable
5.00€ -
KY-008 Laser Transmitter Durable
4.76€ -
:MOVE mat line following and activity maps - A1 s
8.93€
-
This is a small (0.4 in x 0.3 in) breakout board for TDK's (Invensense's) ICS43434 bottom-ported, digital microphone that outputs I2S audio as a stream of 24-bit serial words that can be directly read by any microcontroller with an I2S port. No CODEC is required to decode the audio data!
The ICS43434 has the same low noise and high sensitivity as the ICS43432 but cuts the power usage from 1.1 mA in normal mode to ~500 uA and adds a low-power mode which uses just 230 uA. That's right, the ICS43434 uses only 20% of the power of the ICS43432!
The pinout is straightforward. The microphones are NOT 5 V tolerant so apply no more than 3.6 V to 3V3 on the board.
On the Teensy 3.2, CLK connects to Teensy pin 9 (BCLK), WS connects to Teensy pin 23 (LRCLK), and pin 13 is the serial data out.
- Availability: 4