Latest Products

Move pointer over the image to zoom in

toradex oak IO module

50.00€
Qty:
Print
The Oak IO is a USB attached digital input / output board. Each of the 24 I/Os can be configured 
individually to act as CMOS input, CMOS output or open drain I/O. The logic level of all I/Os can 
be set to 3.3V or 5V by a single jumper. 
8 of the 24 I/O lines are ESD protected and have disconnectable interfaces. The mating connectors 
feature screw terminals to allow a quick attachment of bare wires. These I/O lines are provided 
with pull up resistors to allow direct sensing of switches without external circuitry. 
For the other 16 I/O lines, a pin header with a 2.54mm pitch is provided for a simple connection 
of the inputs and outputs. 
The output lines can be set with a maximum USB latency of 1ms. The report rate for reading the 
I/O pins is user adjustable from 1ms to 65s. The minimum USB latency for reading the inputs is 
therefore 1ms. 
The Oak IO can be integrated in a custom application very easily. The operating power as well as 
real time input/output data and uncritical device configuration data are all transferred through a 
simple USB cable. The very low power consumption, including automatic entering into sleep mode, 
allows using the device not only in fixed installation, but also in mobile applications. 
 
  • Availability: 1
  • Manufacturer: Toradex

Powered by Abantecart eCommerce Solution