Components

Sort By:  
  • Black Heat Shrink Tube Electrical Insulation ()

    Supplied internal diameter:2.0mm,2.5mm,3.5mm,5.0 mm,7.0 mm,10.0mm,13 mm
    Fully shrunk internal diameter:1.0mm, 1.25mm,1.75mm, 2.5mm, 3.5mm, 5mm, 6.5mm

    Color:black
    Shrinkage Ratio:2:1 (will shrink to 1/2 its supplied diameter)
    Material:Polyolefin
    Minimum Shrinkage Temp:+70°C
    Full Shrinkage Temp:+110°C maximum
    Operating Temperature:-55°C to +125°C
    Tensile strength:10.4 Mpa
    Dielectric strength:15 kV/mm
    Manufacture specification:ISO9001
    Flammability:Flame Retardant
    Approvals:UL Approved
    Supplied format (round or flat):Product is supplied flat
    Cutting method:Scissors or sharp knife
    Sets of 5 pieces

    Add to Cart
    1.79€
  • New Led Ring 16x 5050 RGB LED Board with Integrated Drivers Module Geekcreit for Arduino - products that work with official Arduino boards ()
    16 ultra bright smart LED are arranged in a circle with 1.75" (44.5mm) outer diameter. 
    The rings are 'chainable' - connect the output pin of one to the input pin of another. Use only one microcontroller pin to control as many as you can chain together! 
    Each LED is addressable as the driver chip is inside the LED. 
    Each one has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and no external choke resistors are required making the design slim. 
    Power the whole thing with 5VDC (4-7V works) and you're ready to rock.
    There is a single data line with a very timing-specific protocol. 
    Since the protocol is very sensitive to timing, it requires a real-time microconroller such as an AVR, , PIC, mbed, etc. 
    It cannot be used with a Linux-based microcomputer or interpreted microcontroller such as the netduino or Basic Stamp. 
    As it requires hand-tuned assembly it is only for AVR cores but others may have ported this chip driver code so please google around. 
    An 8MHz or faster processor is required.
    Comes as a single ring with 16 individually addressable RGB LEDs assembled and tested.
    Add to Cart
    7.14€
  • SMD capacitors assortment kit of 660 ()
    Specification:

    Type: 1206 0603 0805 SMD/SMT Resistor

    Quantity: 660 pieces, each value is 20 pieces.

    Value: 33 different values.



    1R (1R00) 3R3 (3R30) 5R1 (5R10) 10R (10R0) 22R (22R0) 47R (47R0)

    62R (62R0) 82R (82R0) 100R (1000) 150R (1500) 330R (3300).

    470R (4700) 680R (6800) 1K (1001) 1K8 (1801) 3K (3001) 4K7 (4701)

    5K1 (5101) 7K5 (7501) 10K (1002) 12K (1202) 18K (1802)

    33K (3302) 43K (4302) 51K (5102) 75K (7502) 100K (1003).

    200 K (2003) 300 K (3003) 390 K (3903) 470 K (4703) 680 K (6803) 1 M (1004).

     
    Add to Cart
    23.80€
  • Shift Register IC ()

    IC, switching register, 74HC165, 16SOIC, switching register, logic ICs, 5 pieces | 74HC165D, 653

    IC, switching register, 74HC165, 16SOIC
    Logic Family / Base Number: 74HC165
    Switching register function: parallel to serial
    No of elements: 1 element
    No bits per element: 8 bits
    Logic case style: SOIC
    No of pins: 16 pins
    Min. supply voltage: 2 V.
    Maximum supply voltage: 6V
    IC Output Type: Standard
    Logic IC Family: 74HC
    Logic IC base number: 74165
    40°C.
    Maximum operating temperature: 125°C.
    Product range: 74HC165
    74HCT165.
    MSL: MSL 1 Unlimited
    SVHC: No SVHC (June 27, 2018).
    Base number: 74.
    Frequency: 56MHz
    IC Generic Number: 74HC165
    Max. input current: 1 µA.
    Logic function number: 74165.
    Logic IC base number: 74165
    Logic IC function: 8 bit parallel-in/serial-out shift register.
    Logic type: switching register
    No of elements: 1 elements.
    No of inputs: 8
    Maximum power loss: 500 mW.
    Connection Type: Surface Mount

    Add to Cart
    14.28€
  • Resistors Set (400-600pcs) ()

    Description
    Rated Power:1/4W
    Resistance:30 kinds
    Resistance Tolerance:1%
    Color:Blue
    Experimental resistor pack 1/4W 1% metal film resistors precision of 1% packet error.
    30 kinds of common resistance of each of the 20

    Specifications are as follows :
    10Ω, 22Ω, 47Ω, 100Ω, 150Ω, 200Ω, 220Ω, 270Ω, 330Ω,
    470Ω, 510Ω, 680Ω, 1KΩ, 2KΩ, 2.2KΩ, 3.3KΩ, 4.7KΩ,
    5.1KΩ, 6.8KΩ,10KΩ, 20KΩ, 47KΩ, 51KΩ, 68KΩ, 100KΩ,
    220KΩ, 300KΩ, 470KΩ, 680KΩ, 1M

    Add to Cart
    23.80€
  • 6LR61 9V battery ()


    Type of battery
    alkaline

    Rated voltage
    9V

    Cell size
    6F22, 6LR61

    Battery features
    non-rechargeable

    Leads
    none
     

    Add to Cart
    3.81€
  • Power Adapter DC 9V 1A for Arduino ()

    Description
    Input : 100V-240V 50/60Hz
    Output : DC 9V 1A /1000mA
    Length of the cable: 100CM
    Out put adaptor : 5.5mm x 2.1mm
    Dimension: 7.6 x 7.5 x 2.6 cm
    the adapters Connector: inside positive (+) outside negative (-)
    Power Supply with LED indicator
    Product Features:
    (1) completely solve the problem of insufficient power supply.
    (2) to better protect the circuit, long life, and make faster transmission.

    Add to Cart
    5.36€
  • plain bore gears (a variety of different sizes) ()

    Function:
    1. Cast steel material, provides greater overall strength, durable wear-resistant.
    2. MOD 0.8 gears are aesthetically unique compared to the larger gears, but work the same.
    3. The combination produces a ratio of 7:1, underdrive or overdrive, depending on whether you want to increase speed or maximize torsion.
    4. A true manufacturer means integration and reuse, suitable for industrial robots.
    5. 15-tooth gear, with 6 mm round hole, high hardness, long service life.


    Specification:


    Item Type:Gear
    Material: cast steel
    Product model: S4304-0006-0015
    Product specifications: 6 mm / 0.24 inch round hole 0.8 module
    Outer diameter: approx. 13.6 mm / 0.54 inches.
    Pitch diameter: approx. 12 mm / 0.47 inches.

    Add to Cart
    11.90€
  • Operational tiny Audio Amplifier Breakout ()
    Description
    Single-Supply Operation (2.5V to 5.5V)
    3.2W Output Power into 4I at 5V
    2.4mA Quiescent Current
    92% Efficiency (R L = 8I, P OUT = 1W)
    25μV RMS Output Noise (A V = 15dB)
    Low 0.015% THD+N at 1kHz
    No MCLK Required
    Sample Rates of 8kHz to 96kHz
    Supports Left, Right, or (Left/2 + Right/2) Output
    Sophisticated Edge Rate Control Enables
    Filterless Class D Outputs
    77dB PSRR at 1kHz
    Low RF Susceptibility Rejects TDMA
    Noise from GSM Radios
    Extensive Click-andPop Reduction Circuitry
    Robust Short-Circuit and Thermal Protection
    Availabel in Space-Saving Packages:
    1.345mm x 1.435mm WLP (0.4mm Pitch)
    and 3mm x 3mm TQFNn 
    Add to Cart
    5.00€
  • Micro Corrosion Protection Peristaltic Pump with Large Flow ()
    • High quality peristaltic pump: the shell is made of high-quality material, which is corrosion-resistant, wear-resistant and durable. The roller adopts the shaft of 304 stainless steel, quiet and long life.
    • Guide groove: the guide groove of the pump tube has been specially designed to avoid deviations and damage to the pump tube. Quick buckle of the pump lid, opening slot for quick replacement of the pump tube.
    • Specifications: Applicable voltage: 12-24V, flow range: 0-140 ml/min (depending on motor and pump line), applicable pump tube: 2 x 4/3 x 5
    • Advantages of the peristaltic pump: fine appearance, compact structure, small size for space-saving installation and low consumption.
    Add to Cart
    83.30€
  • mica capacitors kit of 300 ()

    Assortment kit of 300 high quality ceramic capacitors.

    Features:

    Capacity model: 0.1uF ~ 10uF (0.1uF, 0.15uF, 0.22uF, 0.33uF, 0.47uF, 0.68uF, 1uF,2.2uF, u4.7uF,10uF)

    Voltage: 50V

    Capacity tolerance: ± 10%

    Main material: ceramic

    Color: yellow

    Features:



    ● Radial leaded multilayer ceramic capacitor, coated with epoxy resin.

    ● Excellent moisture resistance, miniature size, large capacity,

    Reliable performance. Wide applications in computers, data processing,

    Telecommunications, industrial control, etc.

    Package quantity: 300 pieces (30 pieces each model)

    Packaged in a sturdy resealable plastic container.

    Package Included:



    ● 0.1uF(104 )- 30pcs

    ● 0.15uF (154)- 30pcs

    ● 0.22uF(224) - 30pcs

    ● 0.33uF(334) -30pcs

    ● 0.47uF(474) - 30pcs

    ● 0.68uF(684) - 30pcs

    ● 1uF(105) - 30pcs

    ● 2.2uF(225) - 30pcs

    ● 4.7uF(475) - 30pcs

    ● 10uF(106) - 30pcs

    For example (104) = 0.1uF = 100nF = 100000pF = 10*10^4pF

    Add to Cart
    27.85€
  • Metal Film Polypropylene DC Capacitor Kit of 150 ()
    • Bojack high-quality CBB22 assortment kit for metallised polypropylene film capacitors.
    • Dielectric strength: 400 V / 630 V.
    • Capacity tolerance: ± 5%.
    • Capacity model: 400V (0.01uF/0.1uF/0.022uF/0.2uF/0.033uF/0.33uF/0.047uF/0.47uF/0.15uF/0.56uF), 630 V- (0 ,001uF / 0.0022uF / 0.0033uF / 0.0047) uF / 0.0068uF
    • Pack Quantity: 150 pieces (10 pieces of each model).
    Add to Cart
    29.99€
  • IC Chip Assortment Kit of 150 ()
    • Huge IC Assortment Contains: PC817, NE555, LM358, LM324, JRC4558, LM393, LM339, NE5532, LM386, TDA2030, TDA2822, PT2399, UC3842AN, UC3843AN, ULN20000000000 3AN, ULN. 2803APG, ICL7660s
    • Includes 2 DIP4 sockets, 7 DIP8 sockets, 3 DIP14 sockets, 3 DIP16 sockets, 2 DIP18 sockets
    • Includes various useful IC types such as: optocouplers, timers, oscillators, dual opamps, quad opamps, compressors, audio amplifiers, echo processor, PWM controller, darlington arrays, voltage pump
    • Includes 1 DIP-8 to SOP-8 SMD converter adapter
    Add to Cart
    64.74€
  • Heatshrink Set 580pcs - Coloured ()
    Description
    Material:Heat shrinkable tube
    Quantity:127pcs/140pcs/328pcs/530pcs
    Color:Red/Yellow/Blue/Green/Black

    328 PCS sizes include:
    120×x×1×40mm (yellow, black, orange, green)
    60PCX×2×40mm (yellow, black, orange, blue)
    32×x×3×40mm (yellow, black, orange, green)
    32×x×4×40mm (yellow, black, orange, blue)
    32×x×6×40mm (yellow, black, orange, green)
    20PCS×Φ8×80mm (yellow, black, orange, blue)
    16PCS×Φ10×80mm (yellow, black, orange, green)
    16PCS×Φ14×80mm (yellow, black, orange, blue
    140PCS specifications are as follows
    Inner diameter: 1.0mm, 1.5mm, 2.5mm, 3.0mm, 5.0mm
    Color: black, blue, transparent, green, red, white, yellow
    The 5 specifications classification table is as follows:
    10CMX red heat shrinkable tube (5 specifications, 4 pieces of each specification)
    10CMX yellow heat shrinkable tube (5 specifications, 4 pieces of each specification)
    10CMX green heat shrinkable tube (5 specifications, 4 pieces of each specification)
    10CMX black heat shrinkable tube (5 specifications, 4 pieces of each specification)
    10CMX blue heat shrinkable tube (5 specifications, 4 pieces of each specification)
    10CMX heat-clearing shrink tube (5 specifications, 4 pieces of each specification)
    10CMX white heat shrinkable tube (5 specifications, 4 pieces of each specification)
    127PCS specifications are as follows
    Halogen-free flame retardant heat shrink tubing 127pcs black
    30PCS-2×40mm
    25PCS-2.5×40mm
    20PCS-3.5×40mm
    20PCS-5×40mm
    16PCS-7×80mm
    8PCS-10×80mm
    8PCS - 13×85mm
    530PCS specifications are as follows
    (Quantity + Diameter + Length + Color)
    80 pieces x 1.5 x 45mm yellow
    80 pieces x 2.0 x 45mm blue
    80 pieces x 2.0 x 45mm black
    60 pieces x 3.0 x 45mm green
    50 pieces x 4.0 x 45mm red
    50 pieces x 4.0 x 45mm black
    30 pieces x 5.0 x 45mm black
    20 pieces x 6.0 x 45mm yellow
    20 pieces x 8.0 x 45mm red
    20 pieces x 10.0 x 45mm green
    20 pieces x 10.0 x 45mm blue
    20 pieces x 10.0 x 45mm black
    Add to Cart
    4.17€
  • Ceramic Capacitor Kit of 600 ()
    • BOJACK high-quality ceramic capacitor assortment kit
    • Capacitor models: 10 pF - 100 nF (15 value: 10 pF, 20 pF, 30 pF, 47 pF, 56 pF, 68 pF, 100 pF, 220 pF, 330 pF, 680 pF, 1 nF, 4.7 nF, 10 nF, 47 nF, 100 nF)
    • High-quality capacitors: Premium quality ceramic capacitors with 5% tolerance
    • Box contents: 600 x capacitors (40 of each model) packed in a sturdy, practical and resealable plastic storage box
    • Excellent moisture resistance, miniature size, large capacity and reliable performance. Wide range of applications in computers, data processing, telecommunications, industrial controls, and so o
    Add to Cart
    23.80€
  • Aluminum Heatsink Cooler 10 x 14 x 6mm Adhesive Kit for Cooling Raspberry Pi ()
    Description:  10x 14 x 6mm Aluminum Heatsink

    Features:
    Brand New and High Quality!
    These heatsinks have a layer of thermal adhesive that  allow for easy installation on to your board..
    Just peel and stick.
    Reduce the risk of hardware failure due to  overheating.
    Installation Instructions:
    Make sure the chip modules are free from dirt and  grease
    Peel the protective liner off on the base of the  heatsink
    Apply the heatsinks to the corresponding chip modules  and apply firm pressure.

     
    Add to Cart
    1.49€
  • AAA (box of 4) - Rechargeable batteries with charger ( Copy ) ()
    • 8-way charger for NiMH batteries with housing made from 75% recycled materials. Sustainability meets modern design and first-class performance
    • Charges up to 8 AA or AAA NiMH batteries simultaneously: 1 hour charge time on 2x AA 1600mAh Charging indicator with green LEDs.
    • VARTA Guaranteed maximum safety. Advanced safety technology. Safety timer and minus delta-V shutdown to avoid overcharging, incorrect polarity and short circuit protection, as well as detection of faulty cells and alkali.
    • VARTA Offers the holistic approach: the Varta Eco Charger Multi Recycled is delivered in plastic-free cardboard packaging
    • Box contents: Varta Eco Charger Multi Recycled with USB Type-C charging cable
    Add to Cart
    47.60€
  • AA (box of 4) - Rechargeable batteries with charger ()
    • 4-bay charger for NiMH batteries with EU plug and global voltage for worldwide use
    • Charges 2/4 AA or AAA NiMH batteries: charging time 4.5 hours based on 4x AA 1600mAh
    • Advanced safety technology including safety timer and minus delta-V shutdown to prevent overcharging for best charging results
    • Compact and handy charger in modern white colour with green LEDs for charging indication. Unique Varta brand elements ensure an exceptional product look
    • Box contents: Varta plug charger including 4x AA 2100 mAh recharge battery power
    Add to Cart
    29.75€
  • AA alkaline batteries box of 4 ( Copy ) ()

    Type of battery
    alkaline

    Rated voltage
    1.5V

    Cell size
    AA, LR6

    Battery features
    non-rechargeable

    Quantity in set/package
    4pcs.

    Leads
    none

    Kind of package
    blister
     

    Add to Cart
    2.98€
  • 74HC4051 8 Channel Mux Analog Multiplexer Module ()
    Description
    CJMCU-74HC4051;

    74HCT4051 is a single-pole octal-throw analog switch (SP8T) suitable for use in analog or digital 8:1 multiplexer/demultiplexer applications.

    The switch features three digital select inputs (S0, S1 and S2), eight independent inputs/outputs (Yn), acommon input/output (Z) and a digital enable input (E).
    When E is HIGH, the switches areturned off.

    Inputs include clamp diodes.

    This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
    Add to Cart
    4.17€
  • 12V 37 DC Geared Motor ()
    Rated voltage: 12V
    Speed parameters:
    Ordinary model: no load speed 130 RPM (plus or minus 5%), load 7 kg (per cm), 70 rpm, locked rotor torque 20 kg
    Gasket type: 6-7 rpm at 12V; 13 rpm at 24 V
    Torque: 2.5kg
    Reduction ratio: 1:86
    Motor diameter: 32.8mm
    Motor length: 22mm
    Fixed aperture: 3mm (M3 screw)
    Reducer diameter: 37mm
    Reducer length: ordinary type: 24mm; Gasket size: 25mm
    Step height: Ordinary: 6mm; Gasket: 4.5mm
    Shaft length: Ordinary: 15mm; Gasket size: 19mm
    Motor shaft diameter: 6mm, D-type shaft (pin edge 0.65mm)
    Add to Cart
    10.12€
  • 12075 DC5V Active Buzzer ()
    Rated Voltage(VDC):5V

    Operating Voltage(VDC):3~7
    Rated Current (MA):≤30
    Sound Output at 10cm(db): >82
    Resonant Frequency(Hz):2700±300
    Tone:Continuous
    Operating Temperature(C):-20-+70
    Storage Temperature(C):-30~+80
    Add to Cart
    1.43€
  • Aluminum Heatsink Cooler 14 x 14 x 6mm Adhesive Kit for Cooling Raspberry Pi ( Copy ) ()
    Description:  14 x 14 x 6mm Aluminum Heatsink

    Features:
    Brand New and High Quality!
    These heatsinks have a layer of thermal adhesive that  allow for easy installation on to your board..
    Just peel and stick.
    Reduce the risk of hardware failure due to  overheating.
    Installation Instructions:
    Make sure the chip modules are free from dirt and  grease
    Peel the protective liner off on the base of the  heatsink
    Apply the heatsinks to the corresponding chip modules  and apply firm pressure.

     
    Add to Cart
    1.49€
  • Transistors Assortment Kit of 300 ()

    Colour: black
    Material: ABS
    Package List
    15 values:(each 20pcs)
    1. S9012
    2. S9013
    3. S9014
    4. S8050
    5. S8550
    6. 2N3904
    7. 2N3906
    8. BC327
    9. BC337
    10. Tl431
    11. MPA42
    12. MPA92
    13. A1015
    14. C1815
    15. 13001

    Add to Cart
    32.73€
  • SMD resistors assortment kit of 1800 ()
    • Rated voltage: 10 V; power / watt: 1/10 W; maximum operating voltage: 75 V
    • 45 values. Different resistance values: 0R 1R 2R 2.2R 3.3R 4.7R 5.1R 6.8R 10R 22R 33R 47R 51R 68R 100R 120R 220R 330R 470R 510R 680R 1K 2.2K 3K 3.2K 3. 3K 4.7. K 5.1K 6.8K 10K 15K 20K 22K 33K 47K 51K 68K 100K 220K 330K 470K 510K 680K 1M 10M.
    • Easy to identify: each SMD resistor is marked with a resistance value, which is very convenient for you to use and distinguish.
    Add to Cart
    17.85€
  • Soldering Paste with lead ()
    • Composition of soldering paste: sn:42%, bi:58%
    • Low temperature soldering paste, melting point: 138°C (280F)
    • Lead-free soldering paste, gross weight: 1.05 oz/30 g syringe
    • Syringe soldering paste flux properties: lead-free, smooth and even soldering points, reflow produces no tin beads and tin bridges
    • Lead-free solder flux tin paste Application: welding radiator modules & LED welding & high frequency welding & PCB BGA CPU SMD rework tools
    Add to Cart
    17.85€
  • transistor arrays chip integrated circuit set of 10 ()
    • ALLECIN ULN2803 is a high voltage high current Darlington transistor array - perfect for a variety of electronic experiments.
    • Current: 500mA; Voltage: 50V
    • Features: Output terminal diodes & inputs compatible with different types of logic.
    • Widely Application Solenoid Coils & Relays & DC Motors & LED Indicators & Incandescent & High Performance Buffers.
    Add to Cart
    11.90€
  • Solid Side Emitting Fiber Optics 20meters, <5mm diameter ()
     
    • The outer diameter of the PMMA fibre cable is 3 mm, with 3 metres or 9.8 ft length. It is recommended to control the operating temperature range between 0 and 180 Fahrenheit.
    • The fiber optic emits bright color (light source is not included), with good optical conductivity and flexible enough.
    • First place the fiber optic cable into your LED light gap and then create the shape you need.
    • The light source must be purchased separately, here it is not included.
    Add to Cart
    14.28€
  • ESP32 Basic Core loT Development Kit V2.7 ()

    Product Features

      • Based on ESP32 development
      • 16M FLASH
      • Integrated full-color high-definition IPS display panel and a variety of hardware peripherals
      • Rich resources interface, compatible with M5Stack stacking modules and sensors, highly expandable.
      • Use M5CORE BOTTOM base built-in lithium battery, 15x IO leads.
      • Compatible with multi-platform development:

    Included

      • 1x BASIC
      • 10x Dupont line
      • 1x Type-C USB(20cm)
      • 1x manual
      • 1x sticker

    Application

      • IoT Controller
      • DIY creator works
      • Smart home control

    Specifications

    Specifications Parameters
    ESP32-D0WDQ6-V3 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi
    Flash 16MB
    Input power 5V @ 500mA
    Interface TypeC x1, I2C x1
    IO G21, G22, G23, G19, G18, G3, G1, G16, G17, G2, G5, G25, G26, G35, G36
    Button Physical button x 3
    LCD screen 2.0"@320*240 ILI9342C IPS panel, maximum brightness 853nit
    Speaker 1W-0928
    USB chip CH9102F
    Antenna 2.4G 3D Antenna
    Battery 110mAh @ 3.7V
    Net weight 47.2g
    Gross weight 93g
    Product size 54mm x 54mm x 18mm
    Packing size 95 x 65 x 25mm
    Cover Material Plastic ( PC )
    Add to Cart
    65.33€
  • Precision DS3231 Real Time Clock Module RTC DS3231 3.3V/5V with Battery ()

    Description:

    Raspberry Pi foreign highest precision clock module DS3231

       Modules can adapt itself 3.3V and 5V systems without level conversion, this is a super convenient!

     

    Feature:

    • The 1.-40 ° C to +85 ° C temperature range, timing accuracy kept at ± 5ppm (± 0.432 sec / day)
    • 2 timed to provide continuous battery backup
    • 3 low-power
    • 4. Device package and function compatible with the DS3231
    • 5. Complete clock calendar functions include seconds, minutes, hours, day, date, month and year timing and provide valid until the year 2100 leap year compensation
    • 6 two calendar alarm
    • 7.1Hz and 32.768kHz output
    • 8 Reset button debounced input and output
    • 9-speed (400kHz) I2C serial bus
    • 10. +2.3 V to +5.5 V Supply Voltage
    • 11 ± 3 ° C accuracy digital temperature sensor
    • 12.-40 ° C to +85 ° C operating temperature range
    • 13.16-pin SO (300mil) package
    • 14 by Underwriters Laboratories (UL) certification

     

    Package Include:

       1PCS DS3231 clock module

    Add to Cart
    3.45€
  • FT232 USB To TTL Flash Line With CTS RTS ()
    FT232 USB to TTL serial adapter 3.3V (6 pin 0.1” pitch female socket header) connects devices with 3.3 V logic level UART signals interface to a laptop via USB port
    A genuine FT232RL chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates
     
    FTDI USB to TTL serial cable 3V3 (6 way outputs) provides access to Tx, Rx, RTS#, CTS#, VCC (5v) and GND (power line provides 5V and data signal is at 3.3V)
    FTDI chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM
     
    6 pin header TTL to USB converter cord is compatible with Windows 11, 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE, Mac OS, Linux 2.4 and greater; ideal USB 2.0 debug cord for Vendor ID re-write, router, GPS, set top box, transmitter, flash firmware on hard drive, etc.
    Add to Cart
    5.59€
  • AAA alkaline batteries box of 4 ()

    Type of battery
    alkaline

    Rated voltage
    1.5V

    Cell size
    AAA, R3

    Battery features
    non-rechargeable

    Body dimensions
    Ø10.5x44.5mm

    Quantity in set/package
    4pcs.

    Leads
    none

    Kind of package
    blister

    Add to Cart
    4.40€
  • 10 Grid Digital Segment LED Light Bar 10 Flat Tube of Super Bright 2 Red+3 Yellow+4 Green+1 Blue Light Flat Tube ()
     10 Grid Digital Segment LED Light Bar 10 Flat Tube of Super Bright 2 Red+3 Yellow+4 Green+1 Blue Light Flat Tube
    Add to Cart
    4.17€
  • New LED Ring 24 x WS2812 5050 RGB LED with Integrated Drivers ()
    24 ultra bright smart LED Ring are arranged in a circle with 66mm outer diameter. The rings are 'chainable' - connect the output pin of one to the input pin of another. Use only one microcontroller pin to control as many as you can chain together! Each LED is addressable as the driver chip is inside the LED.
    Add to Cart
    9.52€
  • Aluminum Heatsink Cooler 14 x 14 x 6mm Adhesive Kit for Cooling Raspberry Pi ()
    Description:  14 x 14 x 6mm Aluminum Heatsink

    Features:
    Brand New and High Quality!
    These heatsinks have a layer of thermal adhesive that  allow for easy installation on to your board..
    Just peel and stick.
    Reduce the risk of hardware failure due to  overheating.
    Installation Instructions:
    Make sure the chip modules are free from dirt and  grease
    Peel the protective liner off on the base of the  heatsink
    Apply the heatsinks to the corresponding chip modules  and apply firm pressure.

     
    Add to Cart
    1.49€
  • Aluminum Heatsink Cooler 8 x 8 x 4mm Adhesive Kit for Cooling Raspberry Pi ()
    Description:  8 x 8 x 4mm Aluminum Heatsink

    Features:
    Brand New and High Quality!
    These heatsinks have a layer of thermal adhesive that  allow for easy installation on to your board..
    Just peel and stick.
    Reduce the risk of hardware failure due to  overheating.
    Installation Instructions:
    Make sure the chip modules are free from dirt and  grease
    Peel the protective liner off on the base of the  heatsink
    Apply the heatsinks to the corresponding chip modules  and apply firm pressure.

     
    Add to Cart
    1.18€
  • 1 pair Round Single Hook Clip Test Probe for Electronic Testing ()

    Descriptions:

    1.Can be used in electronics or laboratory testing work.
    2.Easy for installation and safety for use with the insulation plastic boots covered.
    3.Great replacement connector hooks for the testing lead cable.

    Specifications:
    Product Name: Testing Hook
    Application: Testing Work
    Each Size: 58 x 12mm / 1.7 inch x 0.47 inch (L * Max Dia)
    Hole Dia : 4mm /0.16 inch
    Color: Red and Black
    Material: Metal ,Plastic

    Add to Cart
    1.19€
  • DC 0-30V 2 Wire LED Display Digital Voltage Voltmeter Panel Car Motorcycle ()
    Item specifics
    • Display Type:Digital Only
    • Operating Temperature:-10℃-+65℃
    • Accuracy Class:0.1%
    • Power Supply:DC
    • Measuring Range:DC 0.1V-30V
    • DIY Supplies:Electrical
    • Dimensions:31*21mm(L* W)
    • Model Number:Digital volt meter
    • Measuring range:DC 0.1V-30V
    • Input range:DC 2.7V-32V
    • Display:Three 0.36 "digital tube
    • Measurement accuracy:0.1%
    DESCRIPTION
     DC 0-30V 2 Wire LED Display Digital Voltage Voltmeter Panel Car Motorcycle
     Measuring range: DC 0.1V-30V            
     Input range: DC 2.7V-32V            
     Max Input: DC 32V. The device can be damaged if input is over 32V            
     Display: Three 0.36 "digital tube            
     Measurement accuracy: 0.1%            
     Refresh rate: about 300mS / times            
     Input impedance: About 100K            
     Screw holes measures :28mm            
     Operation Temp: -10 Celsius degree-+65 Celsius degree

    Add to Cart
    4.64€
  • NeoPixel Stick - 8 x 5050 RGB LED with Integrated Drivers ()
    WS2812 NeoPixel Stick Strip 8 Way Serial 5050 RGB LED with Integrated Controllers UK Stock
    Ideal for Arduino Projects, works great with Adafruit Neopixel Library

    Description:
    Control circuit and RGB chip are integrated in single 5050 package.
    Each LED has built-in signal reshaping circuit.
    Built-in reset circuit and power loss reset circuit.
    Each pixel of primary color can achieve 256 brightness display
       total 16777216 colors
    Scan frequency not less than 400Hz.
    Single Data Connection for all LEDs.
    Maximum 5metres between LEDs without any extra circuitry.
    30fps with 1024 pixels.
    Send data at speeds of 800Kbps.
    Internal Constant Current Source for consistent colours across all LEDs.
    Add to Cart
    5.95€
  • PL2303HX USB to TTL Download Module ()

    Features:

       1. Using the new control chip PL2303HX, it can brush the machine at high speed and stably
       2. With 500mA self-recovery fuse overcurrent protection
       3. Set two data transmission indicators to monitor the data transmission status in real time
       4. Brush 3.3V and 5V pin interface, convenient for different voltage system machines that need power supply
       5. The interface pin header is parallel to the board, instead of being installed perpendicular to the board, which is convenient for the DuPont line when flashing.
       6. The entire circuit board is covered with transparent heat-shrinkable tubing, so that the PCB circuit board and the entity form an independent state, thereby protecting the board metal from sudden explosion and burning. Due to the use of transparent materials, there is no interface for screen silk screen viewing and indicator monitoring effects
       7. Support WIN7 syste

    Add to Cart
    3.21€
  • 4mm Banana Plug Jack Socket Female Binding Post ()
    Type : Banana
    Male/Female : female
    Solid hard plastic shell
    Quantity :  1 x red or 1 x black
    Easy installation with screws locking
    Suitable for : 4mm banana plugs, spade terminals or bare wire
    Add to Cart
    0.95€
  • Flashing Cable of CH340G USB to TTL Module ()
    USB To TTL Serial Adapter Module Upgraded Download Cable CH340 Chipset for WinXP
    Features: 100% brand new and high quality
    This is a newly designed product that uses the CH340 chip.
    The CH340 provides a convenient solution for connecting a RS232-like full-duplex asynchronous serial device to any universal serial bus (USB) host.
    The CH340G is perfectly compatible with WinXP/98/VISTA/7/8/systems and can emulate on most operating systems, allowing existing applications based on COM ports to be easily ported and USB connected without having to rewrited COM The port software applies a traditional COM port.
    The cable mainly used in MCU serial communication, can be used in 51SCM, ARM and other application scenarios.
    Ideal USB debugs cord for Vendor ID re-write, router, GPS, set top box, flash firmware on hard drive, etc.

    Specifications: Material:ABS
    Color:Black
    Length:Approx. 100cm/39.37 inches
    Add to Cart
    3.21€
  • Aluminum Electrolytic Capacitor ()

    Aluminum Electrolytic Capacitor


    1.   50V 0.22μF ±20% 105°C  Φ 4 x 7 mm  

    2.   50V 0.47μF ±20% 105°C  Φ 4 x 7 mm  

    3.   50V     1 μF ±20% 105°C  Φ 4 x 7 mm  

    4.   50V   2.2μF ±20% 105°C  Φ 4 x 7 mm  

    5.   50V   4.7μF ±20% 105°C  Φ 4 x 7 mm  

    6.   50V    10μF ±20% 105°C  Φ 4 x 7 mm  

    7.   50V    22μF ±20% 105°C  Φ 4 x 7 mm  

    8.   16V    33μF ±20% 105°C  Φ 4 x 7 mm  

    9.   16V    47μF ±20% 105°C  Φ 4 x 7 mm 

    10. 16V  100μF ±20% 105°C  Φ 5 x 7 mm 

    11. 16V  220μF ±20% 105°C  Φ 5 x 7 mm 

    12. 16V  470μF ±20% 105°C  Φ 6 x 7 mm 

    Add to Cart
    0.42€
  • FT232RL USB to TTL Serial Adapter Module ()

    FT232RL FTDI USB to TTL serial adapter module for Arduino and other microcontrollers.


    Specifications:

    • Interface: Mini USB
    • Chip: FT232RL
    • Indicator LEDs: RXD / TXD transceiver communication indicators
    • Power: USB power supply, 5V or 3.3V selectable
    • Pins: DTR, RXD, TX, VCC, CTS, GND
    • Pitch: 2.54mm
    • Size: 36 x 18mm (L x W)
    Add to Cart
    4.40€
  • VL53L0X Time-of-Flight (ToF) Laser Ranging Sensor Breakout 940nm GY-VL53L0XV2 Laser Distance Module I2C IIC 3.3V/5V ()
    The VL53L0X from ST Microelectronics is a time-of-flight ranging system integrated into a compact module. This board is a carrier for the VL53L0X, so we recommend careful reading of the VL53L0X datasheet (1MB pdf) before using this product. 

    The VL53L0 uses ST's FlightSense technology to precisely measure how long it takes for emitted pulses of infrared laser light to reach the nearest object and be reflected back to a detector, so it can be considered a tiny, self-contained lidar system. This time-of-flight (TOF) measurement enables it to accurately determine the absolute distance to a target without the object's reflectance greatly influencing the measurement. The sensor can report distances of up to 2 m (6.6 ft) with 1 mm resolution, but its effective range and accuracy (noise) depend heavily on ambient conditions and target characteristics like reflectance and size, as well as the sensor configuration. (The sensor's accuracy is specified to range from ±3% at best to over ±10% in less optimal conditions.) 

    Ranging measurements are available through the sensor's I⊃2;C (TWI) interface, which is also used to configure sensor settings, and the sensor provides two additional pins: a shutdown input and an interrupt output. 

    The VL53L0X is a great IC, but its small, leadless, LGA package makes it difficult for the typical student or hobbyist to use. It also operates at a recommended voltage of 2.8 V, which can make interfacing difficult for microcontrollers operating at 3.3 V or 5 V. Our breakout board addresses these issues, making it easier to get started using the sensor, while keeping the overall size as small as possible.
    Add to Cart
    9.52€
  • Raspberry Pi Heat Sink 3pcs ()

    This heatsink set is specially designed for Raspberry Pi, it\'s function is to cool down the board and make your Raspberry operate safely
    The Heatsink have a layer of adhesive on the back of them. Simply peel the adhesive off and stick onto your board
    Reduce the risk of hardware failure because of overheating
    Install Instructions:
    Make sure the chip modules are free from dirt and grease
    Peel the protective liner on the base of the heatsink
    Affix the heatsinks on the chip modules and apply firm pressure
    One set of aluminum heatsink
    1pcs 14mm x 14mmx 6mm Heat sink
    2pcs 8mm x 8mmx4mm

     
    Add to Cart
    2.68€
Per Page      1 - 46 of 46

Powered by Abantecart eCommerce Solution